|
Tuesday, 15 April 2008 |
|
 The KANE455 is a new generation gas analyser that incorporates direct measurement of CO2 using non-dispersive infra red (NDIR) technology and a long life CO sensor. Both sensors have an expected life of over five years.
This approach, and particularly the elimination of lead based electrochemical sensors, (probably the least reliable of all the components in traditional FGAs) will help to ensure that unplanned downtime is minimised and that overall service costs are reduced because there should be no need to replace sensors for 5 years.
The KANE455 has been independently tested and approved to BS EN50379 and so far as Kane are aware, it is the only analyser in the world using NDIR technology to have received such approval.
The features and functionality of the KANE455 are almost identical to the popular KANE425. The KANE455 is supplied with NiMh rechargeable batteries and a charger as standard. It is fully compatible with the KMIRP optional printer and can be upgraded with an optional Bluetooth module for wireless communication to a computer or compatible PDA such as the Cognito Mobile Workforce Management solution.
|
|
|
Wednesday, 13 February 2008 |
|
The KANE-ALERT-CO2 provides a low cost method of assessing carbon dioxide (CO2) levels and ventilation rates in offices, public buildings, commercial kitchens and many other locations where indoor air quality is important. High levels of CO2 can cause drowsiness, headaches or even long term damage. Examples of recommended CO2 limits include:
- Building Bulletin 101 states that the average CO2 concentration in classrooms during teaching should not exceed 1,500ppm
- British Standards BS6896, BS6230 and BS5990 which cover various gas fired heaters state that CO2 concentrations should not exceed 2,800ppm where people are working.
Other applications for the instrument include monitoring growing conditions in glasshouses and to warn of leaks when CO2 is stored in pressurised containers in an enclosed area.
|
|
Read more...
|
|
|
Tuesday, 12 February 2008 |
|
Kane will again sponsor a series of 30 CORGI Events around the UK.
Attending with the sponsors will be CORGI inspectors, local area operations managers and other representatives.
This year CORGI Technical Events will take place in mornings and in some places in the evenings.l Morning events will start at 8.30am with a free hot breakfast roll, finishing at 1pm. Evening events will start at 5.45pm and finish at 9pm.
Registration and attendance is FREE for all CORGI registered installers - to book a place, simply call 0845 165 2459 or email
This email address is being protected from spam bots, you need Javascript enabled to view it
.
The content for each day is:
08:30 / 17:45 Registration and Refreshments
09:00 Introduction
09:15 BS5871 Part 4
10:00 CORGI News
10:30 BS7967 Part 4
11:00 Break
11:30 Renewables
12:00 Looking for Trouble" Quiz
12:45 Questions and Close
|
|
Read more...
|
|
|
Tuesday, 12 February 2008 |
|
Kane will exhibit on Stand No. 616 at InstallerLive 2008 at The Ricoh Arena, Coventry.
|
|
|
Thursday, 17 January 2008 |
|
To help ACS Gas Training & Assessment Centres equip themselves for CPA1, Kane are pleased to offer:
ü Significant discounts on Kane analysers purchased for training and assessment purposes
ü FREE Kane analyser training for staff at ACS Gas Training & Assessment Centres
ü Significant discounts on Kane service/recalibration prices and a 5 year rolling warranty
ü Significant discounts on Kane analysers purchased by ACS Gas Centres for resale
|
|
Read more...
|
|
|
|
<< Start < Prev 1 2 3 Next > End >>
|
| Results 1 - 9 of 19 |
News 
