Kane International Ltd - Home
Home arrow FAQs
FAQs
Frequently Asked Questions and their Answers.
The information provided in these FAQ articles is provided in good faith but Kane International Ltd can accept no responsibility for its application or use.
Item Title
Choosing A Gas Analyser??
What readings can I expect from a diesel exhaust?
How do I set the CO/CO2 Ratio to the top line on a KANE250?
What values for excess air can be expected?
How is excess air calculated?
What is excess air?
What is special about a condensing boiler?
What is the difference between net combustion efficiency and gross combustion efficiency?
What is the difference between combustion efficiency and boiler efficiency?
How is Combustion Efficiency calculated?
What general care should be taken of the printers?
Does cold weather affect my analyser?
What general care should be taken of gas analysers?
Can water damage my analyser?
Is an analyser's calibration data affected by different heights?
Is an analyser's calibration data affected by different levels of ambient humidity?
What is Oxygen referencing?
Where does CO come from?
What are the effects of Carbon Monoxide?
My analyser is on, probe is in flue but O2 reading is 20.9 and CO reading is zero. What's wrong?
When do I know that the readings I am seeing are the ones I should record or print?
My KANE400 has rechargeable batteries but the charger does not seem to work. Why?
What ratio are the Hawk CT200 clamps?
What should O2 ref be set to?
What does COn mean?
What is air free CO?
What is the difference between combustion Eff and boiler Eff?
Why shouldn't I replace my own sensors?
Why are my flue temperature readings -ve when in a hot flue?
What CO level can I expect from a boiler?
Why do my EFF readings show ----?
Why does my CO / CO2 ratio show - - - -?
What is the conversion factor for ppm to mg/m3?
How do I adjust my display contrast when the screen is blank on power up?
Why does my analyser switch off during countdown?
How do I take draft readings with the KANE400, the readings jump around?
What is the response of the HC104 module to...?
Will the RD99 detect dogs breath?
What level of CO is acceptable in a room?
How does the KANE250 do a smoke test? It's always blank on the printout.
How do you interpret Quintox tabulated data from fireworks when there is high / low CO switchover?
Does the KM900 autolog data?
What are safe levels of CO and CO2 in rooms?
What is the CO/CO2 ratio?
Why doesn't my CO sensor zero quickly?
How do I calculate efficiency on wood burning appliances?
Can I use a combustion analyser to test a car exhaust?
Why do sensors need servicing or replacing?
What is net temperature and how do I measure it?
What does NOx mean?
[ Back ]

Latest News

Popular

Archive

 
Developed by Juicy Media