The KM9106 Quintox has established itself as the most cost effective and versatile portable analyser. From its most basic form as a boiler tuning analyser it provides a versatile and cost effective platform that allows enhancements up to a fully portable semi-continuous emissions monitoring system.

         Features:

• Rugged combustion probe with detachable stainless steel shaft, incorporating intergral thermocouple.
• A comprehensive range of probes is available, allowing smoke measurement, higher temperatures and longer shafts.
• Clear, backlight, 4 line display. Displays preset pages or personally configured individual screens.
• Tactile keypad - simple to use.
• Handset stores up to 1926 boiler tests.
• Handset can download direct to PC.
• Remote handset with protective rubber boot.
• Tough case with Aluminium alloy structure and carry strap.

          Standard Product KM9106CO Measures:

• Oxygen
• Carbon Monoxide
• Flue Temp
• Ambient Temp
• Inlet Temp (Probe Optional)

         Calculates:

• Efficiency (nett and gross)
• Nett Temperature
• Date and Time
• Excess air
• Lambda
• Losses
• CO/CO2 ratio
• Poison index
• Oxygen sensor life
• Battery life
• Carbon Dioxide

Standard Features:

• Oxygen sensor with 2 years warranty
• Hydrogen compensated CO sensor with internal filtering that operates to 10,000 ppm
• Automatic cross sensitivity compensation between toxic gas sensors
• ppm and mg/ m3 display
• NOx reading in mg/ m3 reference to NO₂ or NO 
• Powerful extraction pump that produces 500 mBar of suction and over 1.0 litres per minute extraction, with a flue vacuum of 25kPa
• Pump on/off and speed control via handset
• Tough handset with tactile keypad and internal data store
• Stores 1926 boiler tests within the handset
• Integral plain paper printer for immediate record keeping
• User defined printouts for customised reports
• Timed print and/or data store facility for automatic record keeping
• Fully upgradeable

Optional Features:

• WTS9106P - Automatic water extraction to eliminate the risk of an overflowing water trap.

• KM9106PUR -Main purge solenoid to facilitate regular automatic fresh air purging to refresh the electrochemical sensors whilst long term monitoring.

• KM9106HPUR - Changeover solenoid and purge pump to allow automatic switching between low and high range sensors. This provides protection for the standard CO sensor in situations where controlled combustion has not been established eg, during boiler commissioning. The high CO sensor is rated to 10%.

Special Configuration for Environmental Monitoring Applications:

• KMDM220 (220 Vac Drier Module) - This is a self contained Peltier cooled gas drier module that fits into the front compartment of a standard KM9106 carrying case. The Peltier element and its associated cooling fan are powered from a 220 Vac power supply. The cooling chamber is fitted with a peristaltic pump to automatically remove condensate.

• KMHL3000 (3000mm Heated Sample Hose) - This 3 metre sample line is heated to 120°C using the latest self limiting heating elements. The internal sample tube that is in contact with the sample gas is made from a PTFE.

• KMHP1200 (1200mm Heated Flue Probe) - This flue probe has its own integral self limiting heater and a 1200mm insertion length.