Kane International Limited - 4 & 5 GAS: Auto 4-2 & 5-2 Hand Held Analyser

4 & 5 GAS: Auto 4-2 & 5-2 Hand Held Analyser

Hand Held 4 & 5 Gas Analyser AUTO4-2 & AUTO5-2

Click below to Download

Datasheet

Manual

Adverts & Press

AUTOSW3 - 4G AGAR EXHAUST GAS DIAGNOSTIC S/W
Use your gas analyser to its full potential

Features

Easy to use Hand Held 4 or 5 gas Analyser
OIML Class 1 accuracy
Ideal for fault diagnosis
Measures CO, HC, O₂ CO₂ and Lambda
Easily upgradeable to NOx or can be ordered as 5 gas analyser AUTO5-2
Fast warm up time – 150 seconds
RPM and Oil Temperature measurement
Print results via optional Infra-red printer
Can be used on Petrol, LPG and CNG vehicles
Complete with protective rubber sleeve, water trap and filter, carry case, battery charger, and exhaust probe

Optional Extras

Infra-red printer
NOx upgrade
PC Software
RPM Clamp
Oil temperature probe
High temperature exhaust probe

Comparison Table

KANE AUTO 4-2 & 5-2 SERIES
Product Selection	Non-Class 1
Kit Reference	AUTO5-2	AUTO4-2
Hardware
Metrology Standard	Class 1 accurate	Class 1 accurate
Measured Gases – Using NDIR Bench	CO/CO₂ /HC	CO/CO₂ /HC
Using Electro-Chemical Cells	O₂ /NO	O₂
Corrected CO (COK)	√	√
Lambda & AFR	√	√
Power Supply: Intern. Battery/Mains/12V	√	√
Measures RPM: 2, 4 Stroke, DIS, 2-12 Cyl.	√	√
Measures Oil Temperature	√	√
Warm Up Time in less than 3 Minutes	√	√
Fuel Types: Petrol, LPG, CNG, Diesel*	√	√
Infra Red Printer Compatible	√	√
PC Compatible	√	√
Software
Pre-Programmed Language Options	√	√
Pre-Programmed Emission Test	√	√
Auto Store & Data Logging	√	√
Upgradeable Analyser Firmware	√	√
Service Software	√	√
Accessories
High Temperature Probe	√	Optional/EPAUTO2
RPM Inductive Clamp	Optional/RPMCL	Optional/RPMCL
Oil Temperature Probe	Optional/SM11284	Optional/SM11284
Infra-red Printer	Optional/KMIRP	Optional/KMIRP
Laptop Style Carry Case	Optional/14102/2	Optional/14102/2
PC Software	Optional/AUTOSWKIT	Optional/AUTOSWKIT
NOx Upgrade	N/A	NOX4-2

Applications and Useage

The KANE Auto 4 &5 Series Exhaust Gas Analysers are truly portable and set new standards of convenience and ease of use. Weighing just 1kg, the handset fits comfortably in the hand and can run for up to 4 hours on its internal re-chargeable battery.

Ideal for emission diagnostics, tuning and pre-compliance testing.

The programmed recalibration procedure permits low cost servicing either on site or at approved European service facilities. The software includes pre-programmed language options, pre-programmed emission test, auto store & data logging, upgradeable analyser firmware and service software.

An automatic leak test can be performed on every power up. Integral flow checking provides warning of probe blockages.
The analyser goes to the car, not the car to the analyser! No need to shuffle vehicles around. For intermittent faults or for NOx analysis (engine under load conditions), why not data log the results during a road test? Use the PC software to upload and analyse the data as a spread sheet or graphically. With accuracy to OIML Class 1, you are assured of the highest metrology standards.