KANE940

Back to Product Listing

KANE940

Combustion Analyser

For use with larger heating installations the high suction double headed pump allows the KANE940 analyser to be used in flues with suction over 100 mbar without compromising measuring accuracy.

Easy to use for domestic and industrial boiler flue gas measurement and analysis. It operates on all boiler types and can display 8 parameters simultaneously showing measurements and calculations of boiler efficiency and pollution.

Measures O2, flue and nett temperature and calculates CO2, boiler efficiency, excess air and losses.

CO is measured with a hydrogen compensated sensor for increased accuracy.

It also measures CO and calculates CO/CO2 ratio - ‘The Poison Index’ - to give complete readings for effective boiler analysis and safety.

Measures NO and calculates NOx.

Big character display

IR printer link... printed header can be customised

Large memory to store results for easy transfer to PC

Long life battery recharged in situ

Download PDF Guide

Product Features

Full combustion analyser with infra-red output to optional printer.
The high suction double headed pump allows the analyser to be used in flues with suction over 100 mbar without compromising measuring accuracy
Larger display screen
'Standard' instrument measures O2, CO (hydrogen compensated),
Temperature and differential pressure.
Can be upgraded with up to two additional toxic sensors.
Calculates CO2, CO/CO2 ratio, excess air and efficiency for all fuels.
Fitted with rubber sleeve and rechargeable battery.

Kit contents:

Analyser with rubber protective sleeve
Carry case.
Charger
KMCP10 flue probe

Specification

Parameter	Resolution	Accuracy	Range
Temp Measurement
Flue Temperature	0.1°C/F	+2.0°C +0.3% reading	0-1200°C/32 -2200°F with suitable probe
Inlet Temperature	0.1°C/F	+1°C +0.3% reading	0-50°C/32-122°F
Pressure (optional)	0.1mbar	+2% of full scale	+150mbar to -150mbar
Gas Measurement *1
Oxygen	0.1%	+0.2%	0-25%
Carbon Monoxide (standard H compensated)	1ppm	+20ppm <400ppm +5% <5000ppm +10% >5000ppm	0-10,000ppm,
Carbon Monoxide, (high range)	0.01%	+5% reading from 0.1% to 10%	0-10%
Nitric Oxide (standard)	1ppm	+5ppm <100ppm*1 +5% >100ppm	0-5000ppm
Nitrogen Oxide (low range)	1ppm	+2ppm <30ppm +5ppm >30ppm	0-1000ppm
Nitrogen Dioxide	1ppm	+5ppm <100ppm +10ppm <5000ppm +10% >500ppm	0-100ppm
Sulphur Dioxide	1ppm	+5ppm <100ppm +5% >100ppm	0-5000ppm
Calculations
Carbon Dioxide*2	0.1%	+0.3% reading	0-99.9%
Losses	0.1%	+1.0% reading	0-99.9%
Efficiency	0.1%	+1.0% reading	0-99.9%
Excess Air	0.1%	+0.2%	0-2885.0%
Temp (Nett)	1.0°C/F	+2°C +0.3% reading	0-600°C/32-1112°F
CO/CO2 ratio	0.0001	+0.0001	0-0.9999
Poison Index	0.01%	+0.01	0-99.99

*1 Using dry gases at STP
*2 Calculated

Pre-programmed Fuels	Natural gas, Town gas, Gascor, Light Oil, Heavy Oil, Propane, Butane, Anthracite, Coke, Coal, Kinsale Gas.
Dimensions Weight Handset Probe	1kg 220mm x 55mm x 120mm L240mm x Dia8mm with 285mm long stainless steel shaft, type K thermocouple and 1.5m long neoprene hose
Ambient Operating Range	-5°C to +50°C/10% to 90% RH non condensing
Power Supply (battery charger)	Input: 110Vac/220 Vac nominal Output: 12 Vac off load
Battery Life	>6 hours from full charge

Optional Extras

Product Reviews

News

Special Offers

KANE in your area...

2012

KANE940

Combustion Analyser

Write Your Own Review

You're reviewing: KANE940

News

Special Offers

KANE in your area...