KANE455 CPA1 KIT

Back to Product Listing

KANE455 CPA1 KIT

Boiler Analyser - With direct C02 measurement

Used by leading boiler manufacturers the KANE455 is more than just a flue gas analyser

Check combustion

Measure differential pressure with high accuracy

Measure differential temperature.

Perform let-by,stabilisation& tightness tests

Perform room CO tests

KANE455CPA1 kit provides all the equpment required for commissioning,servicing and installing new gas appliances

Multi-fuel: Natural Gas, Propane, Butane, LPG, Light Oils (28/35 sec), and Wood Pellets

“Send” button for instant printout and logging

Print separate reports for: Combustion ,pressure let-by/ightness, temperature & room CO build up

CPA 1 Kit includes: Appliance sampling probe kit, gas leak detector,air/liqid probe,pressure hoses and 2 x clamp on pipe probes

Suitable for engineers working to BS7967 and is independently approved to EN50379

Low cost of ownership

5 year extended warranty if serviced annually by Kane

Download PDF Guide

Product Features

Easy to use rotay dial
Long Life CO Sensor
Compact boiler analyser with high accuracy pressure readings.
Four line display controlled by 9 position rotary switch.
Measures O2, CO2 & CO (0-2,000ppm)
Differential pressure and differential temperature.
Calculates CO/CO2 ratio, excess air and efficiency for multi-fuel, gaseous fuels and light oils (28/35 sec).
Infra-red output to optional printer provides combustion, pressure, let-by/tightness, temperature and room CO build up test reports.
gas Leak detection
Air/liquid temperature measurement probe
Pressure Hoses
Clamp on pipe probes for differential temperatre measurement
Industry approved appliance sampling probe kit
Internal memory holds:

99 Combustion tests
20 Pressure tests
20 Tightness tests
20 Temperature tests
20 Room CO tests

Protective rubber sleeve with magnet for “hands free” use

Kit contents:

Specification

Parameter

Resolution

Accuracy

Range

Temp Measurement
Flue Temperature

Inlet Temperature
(Internal Sensor)

External Sensor

1°C/F

1°C/F

1°C/F

+ 2°C (5°F)
+0.3% reading

+1°C/F
±0.3% reading

+ 2°C (5°F)
+0.3% reading

0-600°C
32-1112°F

0-50°C
32-120°F

0-600°C
32-1112°F

Gas Measurement
Oxygen

Carbon Monoxide

Carbon Dioxide
Efficiency*2
Excess Air*2
CO/CO2 ratio*2

0.1%

1ppm

0.1%
0.1%
0.1%
0.001

+0.2% *1

+10ppm <100ppm*1
+5% of reading

+0.3% reading
+1.0% reading
+0.2%
+5% reading

0-21%

0-2000ppm nom.
4000 ppm max for 15 minutes

0-30%
0-99.9%
0-250%
0-.09999

Pressure (differential)

Nominal range +80mBar
Maximum over range without damage to sensor is +400mBar

Maximum 0.001 mBar

<25mBar

+0.005 mBar

+0.03 mBar

+3% of reading

+0.2 mBar

+1 mBar

+80 mBa

1 Using dry gases at STP *2 Calculated

Pre-programmed Fuels	Natural gas, Propane, Butane, LPG Light Oils (28/35 sec), Wood Pellets
Storage Capacity	99 Combustion tests 20 Pressure tests 20 Tightness tests 20 Temperature tests 20 Room CO tests
Ambient Operating Range	0oC to +40oC 10% to 90% RH non-condensing
Chargers (optional)	220v charger, for NiMH batteries only 12v in-vehicle charger, for NiMH batteries only
Dimensions Weight: Handset: Probe:	0.8kg handset with boot 200 x 45 x 90mm 300mm long including handle. 6mm diameter x 240mm long stainless steel shaft with 3m long neoprene hose. Type K thermocouple

Optional Extras

KANEMSP Smoke pump
0-300psi pressure gauge & pressure gauge manifold
Compound gauge (pressure and vacuum)

Product Reviews

Customer Reviews

Excellent Product Review by Nick Cahill Plumbing & Heating: Had my 455 just over a year. It is easy to use and robust, does exactly what it should do. Great service from Kane Manchester when I sent it for calibration. Bought it to test flue gases but use most of the other features too. Personally, I prefer using my traditional manometer for tightness testing as these devices are very sensitive & movement of the test pipe upsets the reading - just my view. Would never buy a different make, this company is what Apple are in the PC world. (Posted on 05/01/2012)
Kane455 cpa1 kit Review by Dipak Patel: hi i bought this piece of kit about 4 months ago, it's so simple to use, this is a real gem a must have for all gas engineers, it so user friendly. (Posted on 05/05/2011)