The KANE900 PLUS handheld analyser is easy to use for domestic and industrial boiler flue gas measurement and analysis. It operates on all boiler types and can display 8 parameters simultaneously showing measurements and calculations of boiler efficiency and pollution.
Measures O2, flue and nett temperature and calculates CO2, boiler efficiency, excess air and losses.
CO is measured with a hydrogen compensated sensor for increased accuracy.
It also measures CO and calculates CO/CO2 ratio - ‘The Poison Index’ - to give complete readings for effective boiler analysis and safety.
Measures NO and calculates NOx.
Big character display.
IR printer link... printed header can be customised.
Large memory to store results for easy transfer to PC.
Long life battery recharged in situ.
- Full combustion analyser with infra-red output to optional printer
- 'Standard' instrument measures O2, CO (hydrogen compensated)
- Temperature and differential pressure
- Can be upgraded with up to two additional toxic sensors
- Calculates CO2, CO/CO2 ratio, excess air and efficiency for all fuels
- Fitted with rubber sleeve and rechargeable battery
- Analyser with rubber protective sleeve
- Carry case
- KMCP10 flue probe
|Flue Temperature||0.1°C/F||+2.0°C +0.3% reading||0-1200°C/32-2200°F with suitable probe|
|Inlet Temperature||0.1°C/F||+1°C+0.3% reading||0-50°C/32-122°F|
|Pressure (optional)||0.1mbar||+2% of full scale||+150mbar to -150mbar|
|Gas Measurement *1|
|Carbon Monoxide (standard H compensated)||1ppm||
|Carbon Monoxide, (high range)||0.01%||+5% reading from 0.1% to 10%||0-10%|
|Nitric Oxide (standard)||1ppm||
|Nitrogen Oxide (low range)||1ppm||
|Nitrogen Dioxide||1ppm||+5ppm <100ppm||0-100ppm|
|Carbon Dioxide*2||0.1%||+0.3% reading||0-99.9%|
|Temp (Nett)||1.0°C/F||+2°C +0.3% reading||
1 Using dry gases at STP 2 Calculated
|Pre-programmed Fuels||Natural gas, Town gas, Gascor, Light Oil, Heavy Oil, Propane, Butane, Anthracite, Coke, Coal, Kinsale Gas.|
220mm x 55mm x 120mm
L240mm x Dia8mm with 285mm long stainless steel shaft, type K thermocouple and 1.5m long neoprene hose
|Ambient Operating Range||-5°C to +50°C/10% to 90% RH non condensing|
|Power Supply (battery charger)||
Input: 110Vac/220 Vac nominal
Output: 12 Vac off load
|Battery Life||>6 hours from full charge|
|YEAR 1||YEAR 2||YEAR 3||YEAR 4||YEAR 5||YEAR 6|
|& £35 per extra sensor||& £99 per extra sensor||& £35 per extra sensor||& £99 per extra sensor||& £35 per extra sensor||& £99 per extra sensor|
Calibration or Conformity Certificates are included in all prices, as appropriate
All prices are in £ sterling and are exclusive of VAT.