Most Webasto cab heaters and other manufacturers, including Eberspacher, require CO2 adjustment when installing, commissioning and servicing to ensure safe and efficient operation.
It is vitally important that a reliable & accurate measuring device is used, and one of Webasto’s leading distributors in the UK, PB Auto Electrics Ltd in Mansfield, has always trusted KANE to provide their cab heater test analyser.
Using the latest KANE150, Craig Beardall, the MD of PB Auto Electrics Ltd, was able to demonstrate, when testing a Webasto heater on a vehicle or on a bench, how well the KANE150 performed when following the official Webasto test procedure.
The heater being tested was a Webasto Air Top 2000 STC heater that was in for an annual service.
The measured CO2 content at partial load (1 kW) must be at 6.6% ±0.5%. After adjustment, the CO2 content at full load (2KW) should be 10.2% ±0.5 vol.%.
Simplicity, ease of use and the accuracy of the KANE150 made the testing process go smoothly and efficiently.
As with all KANE products, the KANE150 is backed by KANE CARE, our promise to never let you down or your money back – Forever
If you would like more information on the KANE150 or any of our products or services, please contact us on 0800 059 0800 or visit our website www.kane.co.uk